|
We are happy to introduce a new line of stages and risers!
Stages and
risers are available for many applications in a wide array of
configurations.
Since they have so many options it is impossible to list all the features and
possible combinations here.
Please see the links below for expanded documentation and then give us a call
at 866 473 9748 and we will assist you in putting together your stage or riser
package and provide pricing.
We need to know these things to be able to design your configuration:
For
stages:
How large of a stage do you need?
(Stage components are made with
4'x8' sections, sizes should be divisible by four.)
How many people do you
want to be able to use the stage at one time?
Do you want portable caddies to
be able to break down and move the stage easily?
Do you want the stage
surface to be carpeted or hardboard?
Do you want the stage to have
skirting?
For risers:
How many people do you need to accomodate?
Will the riser
users be standing or seated?
Do the users need extra space for a music stand,
instrument etc.?
What shape would you prefer: Oval, Bow, Ring, Rectangular
(Please see the brochure for details detials
on shapes etc.)
How long should the riser be?
Link To
Stages and Risers Web Page
Link To
Stages and Risers Information Package (PDF download)
Stage and Riser
Specifications
Platform
Constructed with a ¾" thick solid plywood core, the riser shall be
surfaced with one of the following:
Option 1: Carpet
Option 2: 1/8" thick
tempered hardboard
The edges of the platform shall be routed to allow the
frame to fit flush with the top surface and cover the ends of the
carpeting.
Frame
16 gauge, 1-13/16" high formed steel channel frame shall be
reinforced with 16 gauge steel angle welded to the inside of the channel. The
angle shall provide a continuous support to which the decking is ecured with
screws placed a maximum of 9" apart. The
frame shall completely enclose the top,bottom and edges of the decking
perimeter preventing the decking from
becoming loose and damaged. All areas where frame parts are joined together shall be reinforce
with steel plates attached with
rivets.
Leg Structure
Each leg structure
shall be constructed if 1.05" diameter, 14 gauge steel tubing capped at the
point of floor contact with high impact plastic glides. The vertical load
bearing members shall be joined at the top by full width, steel tube to provide
maximum support to the stage deck. The top of each leg assembly shall fold open
and closed, using 16 gauge steel saddle clips that are secured with at least
four screws. Leg assemblies shall be braced by friction type braces, equipped
with a spring locking device to secure the legs in the open and closed position.
Braces shall be secured to the leg assembly with rivets and to the deck using 8
screws installed through the decking. Legs shall open and close using only one
hand. Gravity ring type brace locks are not
acceptable.
Ganging
Stages and risers shall
be equipped with drop-in couplings that allow units of the same or different
heights to be joined together. All ganging devices shall be permanently secured
to each unit. Ganging devices that is not permanently attached are not
acceptable.
Finish
All metal parts are to
be finished with a black thermofused epoxy
powdercoating.
Capacity
All metal parts shall
be designed to carry a uniform live load of at least 200 lbs. per square
foot.
Portability
Stages and risers shall
be capable of being completely set-up and taken apart quickly, without the need
for tools, by two people of average strength.
Warranty
Stages and risers shall
be covered by 10-year
warranty.
|
