Our Reversible Pew Cushions combine quality workmanship and tailored appearance with the utility of removable zippered coverings. They can be made in virtually any length and can even be made in perfectly curved sections as shown above. We are responsible for the correct fit and sizing. Standard padding is 2" thick. Thicker padding is available if the customer desires. Tufted buttons and beveled front edges are optional on all cushions.
Standard features of our Reversible Pew Cushions include reversible covers with full length zippers, high-density polyurethane padding, and hundreds of fabrics to choose from, all commercial grade 100% nylon or blends, Scotchguard treated. Optional features include notched, angled, or rounded corners, tufted buttons, and welting. Available in two styles.
Styles:
Style #1: 1 1/2" thick high-density foam padding, plain cushion, no welting on edges
Style #2: 2" thick high-density foam padding, plain cushion, no welting on edges
Style #3: 2" thick high-density foam padding with welted edges
How to Measure for Reversible Cushions
Please provide the following information when measuring for Reversible Pew Cushions. All measurements should be in inches to the nearest 1/8".
1. Length: Using a steel tape measure, measure along the back of the pew seat from the inside end to inside end. If the pew has a center divider, measure each section separately from the pew end to the divider.
2. Width: When there is a small radius at the front edge, measure from the back corner of the seat to the start of the radius at the front edge. When there is a large radius at the front edge, measure from the back corner of the seat to halfway down the radius at the front edge.
3. If possible, please send photographs via email if possible to confirm measurements. Please indicate any issues with current pew cushions.
For additional information or to request a custom quote, contact Customer Service at 866-213-3780 or email us at [email protected]s.com.
